Samsung Galaxy Tab S6 Lite has got a lot of attention in 2024 thanks to incredibly low price tags of sub-$200, which is far from its official price.
You can now download and install a debloated ROM for the Samsung Galaxy Tab S6 Lite that will give you bloat-free experience.
To install this debloated ROM on your Samsung Galaxy Tab S6 Lite, you will need to enable OEM unlocking in developer options and make sure you never switch it back to off. You would also need an unlocked bootloader for Tab S6 Lite.
Next, you would need latest ODIN to flash the ROM. Remove any screen security feature that you have on.
Download ROM from here.
Boot into recovery mode then do a “Wipe data/factory reset” + “Wipe cache partition”
Select “Power off” and power off the tablet
Press “Volume Up” and “Down” at the same time then insert the usb cable on your computer until you see the blue screen, then press “Volume Up” one time. (You should see several text lines on upper left screen)
In Odin : Check “BL” and click on it and select the file starting with “BL_” then wait the message “Leave CS..” in the console.
Check “AP” and click on it and select the file starting with “AP_”. (No console message will show, since the file doesn’t have an “.MD5” extension)
Check “CSC” and click on it and select the file starting with “CSC_” (that will do a factory reset and you will loose all your data and settings)
Only for the SM-P619 model. Check “CP” and click on it and select the file starting with “CP_”
Options checked should be only “Auto Reboot” and “F. Reset Time”
Press “Start” and wait the flashing process until you get a green square with “PASS” on it.
The tablet will reboot. Do the setup without connecting to WI-FI network.
Boot into recovery mode then do another “Wipe data/factory reset”.
Do the setup again. This time if you want, you can connect to your WI-FI network during the setup.
Credit goes to https://xdaforums.com/m/svan987.5767828/